![]() ![]() Regarding the computer connection - Meade makes a cord which connects to the Autostar Handbox and an RS-232 (9 pin) serial port. The LPI-G also includes USB cable, software drivers, ASCOM drivers. You can find the software needed (the new Autostar updater 5.9 and Autostar Suite 5.5) on Meade's Website under Customer Service. It's low-noise dark current, small pixels and fast USB 3.0 readout make this camera both great at high resolution photography of the planets or galaxies. This camera has a USB 2.0 connection and ST-4 guider port for easy connection to the mount. Overview Built-in USB Hub: 2 x USB 2.0 Ports Power Supply: DC 5V over PC USB Port. The ship to address is IMA, AMC ACCT W23BFK, Bldg 12501, Fort Meade. Could I make Vimicro USB 2.0 PC Camera (Venus) works on Windows 10 My PC with Windows 10 doesnt detect my webcam, although it detects the audio. Equipped with a Panasonic 16MP CMOS image sensor, regulated two-stage thermoelectric cooler, and 3.8micron pixels, the DSI IV is the ideal camera for deep sky photography. PalmiR250 / 150EF Thermal Imaging Camera with 150MM motorized lens camera. You can also refer to the following link to learn how to install the driver in compatibility mode. Camera settings of Daytime, Nighttime, Moon/Ploanet, or Snapshot/Video options. It works but does not have any of the user interface indicated in the Instruction Manual. ![]() Make sure that the camera is plugged into a USB 2.0 port and not a USB 3.0 port. I installed the driver for the PC camera, when I tried to run the software - Start, All Programs, USB 2.0 Camera, I do not get Meade PC Camera as an option. The DSI IV is the most advanced DSI camera ever. You can download the Detection Tool of Vimicro PC Camera Processors Model, available on the link above, and check if the camera gets detected.
0 Comments
Leave a Reply. |